John Deere 959 M

2019 John Deere 959M tracked feller buncher, maintenance on drive motors done every 250 hrs, and rotated every 500hrs, 246 kW (330 hp) engine, 1392 Nm (1027 lb-ft) engine torque,Engine, Model: John Deere PowerTech Plus 6090PSS,Output: 246 kW (330 hp) ... 1900 rpm,Torque: 1392 Nm (1027 lb-ft),Rated Speed: 1900 rpm 29 ft 1 in (8.88 m) maximum boom reach, 10 ft 5 in tail swing, superstructure width of 3.2 meters (10 ft 6 in) and a track gauge of 2.72 meters (8 ft 11 in), Track Rollers (Each Side), 9Carrier Rollers (Each Side), Superstructure Width: 3200 mm (10 ft 6 in), Track Gauge: 2720 mm (8 ft 11 in), Base Carrier Length: 4.9 m (16 ft 1 in), Overall Width: 3330 mm (10 ft 11 in),Track Length on Ground: 3810 mm (12 ft 6 in),Tailswing Radius: 3180 mm (10 ft 5 in),Ground Clearance: 747 mm (29 in),Fuel Tank: 285.4 gallons Cab Leveling Tilt (Forward): 26 degrees,Cab Leveling Tilt (Rear): 14 degrees, Travel Speed: 2.3 mph,Lift Capacity at Max Reach: 17,570.9 lbs, Cutting Swath: Up to 13.2 ft weight 83,260lbs Quadco 27B Height 2,972 mm 117" Width 1,778 mm 70", Depth 1,880 mm 74", Maximum Throat Opening 1,466 mm 57.7" ,Maximum Throat, Opening ... Teeth 1,118 mm 44", Accumulation Area 0.58 m2 6.2 ft2, Weight with XT Rotate 4,100 kg 9,040 lbs, Cutting Capacity 686 mm 27", Tip-to-Tip Diameter 1,651 mm 65" ,Rated Saw Speed 1,000 rpm, Number of Teeth 18, Saw Kerf 59 mm 2 5/16"Style One Piece,Cylinders (Diameter) 3",Grab Arms 2 Cylinders, Accumulating Arms 2 Cylinders